2016 – 2017 – 2018 – 2019 – 2020 – 2021 – 2022 – 2023 – Current
Version 4.11.3
15.12.2021
Changed functions
- Erschütterungsereignisse, die vom Menhir hochgeladen werden, werden nun ebenfalls nicht mehr als Files abgelegt, sondern in der Importwarteschlange des jeweiliges Geräts verarbeitet.
Version 4.11.2
10.12.2021
Changed functions
- Hintergrunddaten, die vom Menhir hochgeladen werden, werden nun nicht mehr als Files abgelegt, sondern in der Importwarteschlange des jeweiliges Geräts verarbeitet. Dies macht den Importprozess effizienter und verhindert vor allem beim Nachladen von älteren Daten auf einmal eine Überlastung des Importprozesses.
Version 4.11.1
08.12.2021
New features
- In tachymetric data sources, the raw data from device measuring points can now be exported in the original format.
Changed functions
- Exporting background data is no longer done per device, but rather per device measuring point. This allows you to control the export in more detail and fixes several problems related to different configurations of the device measuring points (type of background data, interval, etc.)
Fixed bugs
- Exporting background data via the web API has not functioned since version 4.11.0.
- When switching language in the web interface, the formatting of event tables did not immediately adapt.
Version 4.11.0
25.11.2021
New features
- SFTP servers are now also supported as export targets.
Version 4.10.8
17.11.2021
New features
- Along with the possibility of downloading files individually, there is now also the option to download all files in a list as a Zip archive. This is of particular interest for export orders, in order to download all export data at once.
Changed functions
- Loading the web pages now happens more quickly.
Fixed bugs
- When using the “English – USA” language setting, an error occurred in some circumstances when entering time points.
Version 4.10.7
12.11.2021
New features
- Further evaluations are now available: “Value/value diagram” and “Value/value table”.
- Optional validation of input data in tachymetric measurements.
Fixed bugs
- Retrospectively sorting certain columns in an event table no longer functioned correctly and led to an error.
- The “Last available data” option in SmartFilter did not function correctly in some circumstances.
Version 4.10.6
12.10.2021
Fixed bugs
- Imported one-third-octave band data was 1000x too large upon export.
Version 4.10.5
08.10.2021
Changed functions
- Imports from https://www.pegelonline.wsv.de/ no longer functioned reliably via http and is now carried out via https. Errors that occur during retrievals from the web service are now displayed in the device log.
Fixed bugs
- The export from measuring points displaying one-third-octave band data sometimes did not function.
- When importing one-third-octave band data, the import only worked on the next day after changing the Menhir settings.
Version 4.10.4
05.10.2021
Changed functions
- Deleting devices and data sources can now be done faster. Checking whether a device can be deleted has been standardized for all types. Generally the following applies: If a device or data source is used in a measuring point, it is notpossible to delete it. All assignments must be removed beforehand.
- The calculation for the “SmartDike-Chain – Borehole trajectory” function block has been revised.
Note: This block is still in the beta phase.
Fixed bugs
- When exporting location-value diagrams as tables, the selection of measurements was not correctly taken over for the table in some circumstances
Version 4.10.3
17.09.2021
New features
- Another choice of interval data has been added to the data export of vibration measurements: “Peaks”, KbfTi” and “Dominant Frequencies” can now be exported together in one file.
- New “3D Chain” function block for Glötzl SmartSINC data evaluations.
Changed functions
- The representation of vibration events in interval data diagrams has been simplified. The start and end time point of the event is no longer marked, only the trigger time point. This keeps the representation of multiple events plainer and clearer.
Fixed bugs
- When importing inclinometer measurements, “Data import successful” was displayed in the log, even if individual measurements could not be imported.
Version 4.10.2
14.09.2021
New features
- An optional label can now be addd to location/value tables, like in location/value diagrams. This is displayed in the “Location” column of the table along with the concrete location value.
Fixed bugs
- An error has been removed that caused the import of data to fail if the data to be imported was structured in a certain way.
Version 4.10.1
25.08.2021
New features
- Importing and exporting octave band data from the Menhir measurement device is now completely supported.
Changed functions
- When exporting interval data, you can now select which data should be exported. All types of interval data are now available to export again.
Fixed bugs
- An error that occured when saving user groups has been fixed.
Version 4.10.0
17.08.2021
New features
- The storage of interval data has been revised internally, creating a new architecture with which SDC can react more flexibly to changes (e.g. to new types of interval data).
Changed functions
- The export of interval data has been restricted to peaks and vector sums. The export process will be fully available again in the next version.
Version 4.9.4
11.08.2021
New features
- Before carrying out an immediate export, the start and end of the export as well as the name can be changed.
- It is now possible to change the color scale used in location-value diagrams, or o select the color yourself. Moreover, the line thickness and the marking of data points can also be set.
- When exporting automatically, the same settings can be made when choosing the user-defined CSV format as when directly exporting a table.
Changed functions
- The sequential color palette has been extended and the colors are now significantly different from each other.
Fixed bugs
- The time period displayed in the event table did not always match the time period set in the measuring point time filter.
- An error has been fixed which caused the vertical gridlines in time-value diagrams to not be positioned exactly at the beginning/end of years, if time periods greater than 8 years were being represented.
Version 4.9.3
04.08.2021
New features
- Diagrams can now also be exported as CSV format files. Previously, diagrams could only be exported as image files.
Changed functions
- For the “Glötzl SINC Chain Link (Vertical)” function block, another output channel “Torsion to north” has been added.
Fixed bugs
- During automatic report generation, some charts were not generated due to invalid chart sizes.
- In certain circumstances, it was possible that input data for a data source was processed only with a considerable delay.
Version 4.9.2
27.07.2021
New features
- In Sprengordnern kann nun festgelegt werden, welche Meldung angezeigt wird, wenn kein Event innerhalb des gewählten Erkennungsintervalls einer Sprengung gefunden wurde. Der Text kann frei gewählt werden und bis zu 70 Zeichen umfassen. Die Trigger-Schwelle des letzten Events kann per Platzhalter #Event.TriggerLevel# an beliebiger Stelle eingefügt werden.
- Die Nutzungsstatistik wurde komplett überarbeitet und es werden nun folgende Statistiken erstellt:
- Datennutzung nach Monaten als Diagramm und Tabelle
- Statistiken für Benachrichtigungen per E-Mail, SMS oder Telefon
- Statistiken für Dokumente und Dokument-Messstellen
Changed functions
- Alarmbenachrichtigungen per E-Mail enthalten nun neben dem Projektlink auch immer einen Link zu dem Alarm.
Fixed bugs
- Die Auswertung “Dateiliste” hatte nicht mehr funktioniert.
- Beim Upload eines Exports zu einem FTP-Server wurden ungültige Zeichen im Dateinamen nicht ausreichend erkannt und automatisch ersetzt.
- Bei der Erzeugung von Berichten konnte es vorkommen, dass Diagramme fehlten aufgrund ungültiger Breite/Höhe. Die Grenzen für die Validierung von gültigen Diagrammgrößen waren hier zu eng gewesen.
Version 4.9.1
08.07.2021
New features
- For alerting, there is now the possibility to import alerts directly from the device or data source, provided that the device and the import format used support this. Alerts will then not be set by analyzing the measured data in SDC, but rather taken directly from the imported data.
- Alerts in measuring point channels can now be deleted not only individually, but also within a certain period of time.
Changed functions
- When importing inclinometer measurements, a success notification appeared that was visible to all users active at that moment. This notification no longer appears. To check the success of an import, you can find a detailed entry related to each import in the device log.
Fixed bugs
- Event tables did not load for users without admin rights.
- When deleting measurements from an inclinometer probe, an error message appeared after the deletion – although the deletion was successful.
- Tachymeter module: When displaying a measurement, the measured values of all three axes appeared the same in the table.
Version 4.9.0
25.06.2021
New features
- It is now possible to automatically export data from SDC, e.g. to an FTP server, according to a configurable schedule.
- When exporting measured value tables from an inclinometer probe, there is now the option to also export head data.
Changed functions
- When loading event tables with a large number of vibration events, it was possible that the website became inoperable. We have now greatly optimized the way that event tables load, so that tables with many events now load quicker.
Fixed bugs
- An error has been fixed that occured when calculating and evaluating Glötzl Smart Inclinometer Chains (SINC).
Version 4.8.4
27.05.2021
Fixed bugs
- After creating a new user, in some cases it was not possible for this new user to log in.
- An error has been fixed that prevented users with the correct rights from duplicating measuring points.
- In the dialog for hiding alerts, the date could only be entered manually due to an error. Now a calendar popup can also be used.
Version 4.8.3
18.05.2021
New features
- In the case of interval data (vibration module), the maximums are now displayed in the legend.
- Further options are now available for communication channels.
- Along with email and SMS, receiving alerts via voice call is now officially available.
- In global evaluations, a further function block is now available for inclinometer chains, in order to calculate and display the borehole trajectory alongside the deformation.
Changed functions
- When hiding folders in the project tree, it is now also possible to hide all subelements of the folder. Previously, all measuring points and folders had to be hidden individually.
- If a voice call for an alert must be confirmed, the confirmation link is no longer automatically added like in email or SMS notifications. The alert via voice call can be confirmed using the voice menu.
Fixed bugs
- The CSV export of a table did not function in evaluation measuring points.
- Deleting user groups failed in some circumstances.
Version 4.8.2
05.05.2021
Fixed bugs
- An error that occasionally occured during the import of Menhir background data has been fixed. It was possible that the data of a device could not be imported for some hours and so the device was shown as offline – even though data had been sent.
Version 4.8.1
28.04.2021
New features
- Notification via voice call
Notifications in the case of alerts were previously possible via email or SMS. Now there is also the option to receive notifications via voice call.
This function is still in the test phase and will be described in more detail in a later version.
Fixed bugs
- Text fields in reports are now correctly placed and displayed.
- An error has been fixed, which could cause an invalid time period error message when using SmartFilter.
Version 4.8.0
15.04.2021
Changed functions
- Occasionally, devices attempt to import data “from the future” due to an error or an incorrect setting. These are now rejected by SDC, if the data is more than 6 hours in the future.
- For Menhir interval data (vibration measurement), only the “Secondary airborne noise” and not the A-weighted vibration acceleration is displayed.
- Previously, input elements could only be displayed per project when importing. Now it is also possible to display these per device. The processing time for input elements is now also displayed in a diagram next to the table, so that a much better analysis is possible.
- The import process for logger data as been revised and optimized in several places, so that even when mass importing data for a data source, the new data is always been processed first.
- “Minimal required number of threshold value violations” is now limited in alert definitions.
Fixed bugs
- In tachymeter measuring points, an offset value can be set when assigning to a data source. An error has been fixed, in which correct measurement data was supplied, but an incorrect value was displayed in the “Last measurement” column in the input channel overview table.
- Deleting created reports now functions correctly again.
Version 4.7.1
08.04.2021
New features
- Duplication with prefix replacement for “Global evalulation” measuring points: “Global evaluation” measuring points now also offer the option to automatically replace the existing prefix with a new one. The same process as for logger measuring points. You can find a more detailed description of this function here.
Changed functions
- For location-value evaluations, creating up to 50 channels in one evaluation is now possible.
- It is now obligatory to enter a name for an evaluation view in order to save it.
Version 4.7.0
29.03.2021
New features
- Import of Campbell TOA5 format
Data logger files from Campbell Scientific in TOA5 format can now be imported into SDC. This means that is now possible to integrate Campbell devices, such as the CR1000X , into an SDC system. - New data source – MQTT data source
With this data source, Glötzl-LoRa-Funk-Sensoren can now be evaluated in SDC. - Edge steepness and 55 dB limit for secondary airborne sound diagrams
For secondary airborne sound diagrams in the vibration measurement module, a line with the limit value 55 dB can now be displayed. If the secondary airborne noise exceeds this limit, the edge steepness is also displayed as an indicator for the speed of the rise in noise. - Assignment of cost centers to SDC objects
The following SDC objects can now be assigned a so-called cost center: alert definitions, user groups, report templates, document measuring points, as well as vibration measurement, logger, inclinometer and tachymeter devices. This information can be used to create statistics, for example for accounting purposes. This can be used, for example, to determine how many alert SMS message the cost centers send in a certain period of time etc.
Fixed bugs
- Creating reports from user-defined document templates did not function correctly in all cases. This has been corrected.
- When calculating edge steepness, depending on the signal curve, values occurred that were too small. The calculation process has been changed.
Version 4.6.2
08.03.2021
New features
- Secondary airborne noise and Wm-weighted vibration acceleration now displayable in an event table : In the event table of a vibration measuring point, secondary airborne noise and Wm-weighted vibration acceleration can now be displayed as additional columns. To display the new values, click on “Edit” in the context menu of the relevant measuring point. Extend the corresponding “event table” in the “Evaluations” tab. You find find all the displayable values here. Open the desired category by clicking on the “Plus” icon and mark the values to be displayed. Save the changes.
Fixed bugs
- The columns of the report template table were not displayed in full length in rare cases. This should now be fixed.
- Reference measurements in logger or tachymeter measuring points could not be deleted in some circumstances.
Version 4.6.1
24.02.2021
New features
- Additional information for blasting operations export: When exporting blasting operations in Excel format, further identification data is displayed concerning vibration events that have occured. In addition to the maximum vector sum, the secondary airborne sound and the edge steepness (= slope between the point where the secondary airborne sound exceeds 55dbA for the first time and the maximum), as well as the Wm-weighted vibration acceleration are exported.
Changed functions
- When analyzing vibration events: Instead of “A-weighted vibration acceleration”, the secondary airborne noise is now displayed. This is obtained by adding 6dB from the previous calculation. What exactly is calculated is theestimated level of secondary airborne noise from vibration measurement according to ONR 199005
Fixed bugs
- The “Manage measuring points” page can now be opened as specified.
- When deleting channels for which alerts with SMS or email notifications were set up, the process was terminated with an error message. This no longer happens. If an attempt is now made to delete a channel with alerts set up, a warning message appears to indicate that the alert will also be deleted, but the deletion process can be continued by confirming this.
Version 4.6.0
12.02.201
New features
- “Global evaluation” measuring points can now be duplicated.
- When exporting vibration events of a measuring point, the comment field can now be used for filtering: If you export the vibration events of a measuring point, you can use a filter to restrict which events are exported. To do this, select the “Events” element in the report definition. Set a check mark by “Only events with comment” here. Events without a comment will not be exported. If the check mark is set, a text field appears. Text can be entered into it and this will then only export events that also contain the entered string.
- Automatic prefix replacement for duplicated channel assignments: When duplicating measuring points and their assignments, there is now the possibility to automatically convert a certain prefix (the beginning of the channel name) into another prefix that can be determined beforehand. In this way, a measuring point can be quickly created that refers to other channels of a device that has already been set up (provided that the channels are named accordingly). To understand this better, see the example below. To use the automatic prefix change, click on “Duplicate” in the row of the desired measuring point in the measuring point overview (in the menu that opens by clicking on the arrow icon on the right). Set a check mark by “Duplicate assignments”. Then set another check mark by “Replace device channels’ names with…” In the first field, the value that should be changed can be entered. In the second field, the value to be used can be set.
Fixed bugs
- When setting up logger or tachymeter measuring points, an error message appeared if an optional name field was not filled out. This has been corrected.
- Existing assignments in the logger or tachymeter module could not be edited later; this is now possible again.
- Saving log entries (even when successful) no longer leads to an error message page.
- If log entries are sorted according to start time, this is now done chronologically correctly (no longer by the order of numerical values).
- After a maintenance announcement on the SDC interface, an error message appeared when French was set as the language. This has been corrected.
- An error has been removed, which meant that files uploaded as an attachment to a measuring point or folder could not be reopened in certain cases.
- When re-importing inclinometer data previously exported as a CSV file, measured value columns were sometimes skipped. This has been corrected.
