Change log 2017

2016 – 2017 – 2018 – 2019 – 2020 – 2021 – 2022 – 2023 – Current

01.12.2017

Folders and measuring points can now be hidden in the project tree if desired.
First version of the Logger module
Supports Glötzl data loggers and the MCC measuring system
Importing water level data from https://www.pegelonline.wsv.de is possible.
Alerting for vibration events.
Measurement data can now be edited retrospectively. Values can be changed (the original value is kept) and certain flags (e.g. transducer failer) can be set.

The right to create reports and the right to edit report templates have been separated, so that rights for user groups can be adjusted more finely.
The device view interface has been modernized and adapted to the Logger and Tachymeter modules.
Device monitoring now occurs via alert definitions. Previously, each device had to be assigned a user group and the maximum allowed times since last contact had to be maintained for each device. In the new version, this can occur directly in the alert definition. The device needs only to be assigned to the relevant alert definition.

01.10.2017

New “Alerting” feature. SDC can now send alert notifications via email and SMS. Three-level alert definitions can be created including optional acknowledgement and escalation messages if the alert is not acknowledged in time.
Track monitoring function block

01.08.2017

Along with visualization with Google Maps, you can now also upload your own plans and/or images for the visualization of measurement points and folders. In the project properties you can select which view should be displayed after logging in.
After the beta phase, first operational version for tachymeter data in SDC
Document measuring points can now be created. These are measuring points, the data of which is not evaluated in SDC but merely managed as documents. This gives you the possibility to manage foreign data or reports in SDC.

Measuring points with negative coordinates were not displayed on the map.
When zooming in diagrams, the diagram was always reset when the zoom tool was selected again.
When editing the email address of a user, domains with more than three letters were not allowed.

01.04.2017

The revision of the report engine is now complete. This means that in this version, there is no longer the possibility of creating reports with the old report engine.
The way in which reports are created has been completely revised and is now much more intuitive and split into modules.
Support for acceleration measurement devices
You can now set up acceleration measuring points, and so evaluate the data from acceleration measurement devices.
In reports, the y axis can be defined for background data.
In background data diagrams, you can choose to “conceal” hidden events, which means that the values are set to 0. This option can also be selected in reports.
New diagram: oscillation path (in analysis view)
New diagram: acceleration (in analysis view)
Limit values for the Swiss and French standards can now be optionally displayed in a report.
When filtering measuring points and blasts by time, there is now also the option instead of fixed time limits to display the last existing data.
New feature: “CSV export of event table”

The interface for filtering measuring points and blasts by time has been revised and standardized.
Events in background data (interval data) are no longer displayed only as a point, but as a range.

Measuring points with negative coordinates were not displayed on the map.
When zooming in diagrams, the diagram was always reset when the zoom tool was selected again.
When editing the email address of a user, domains with more than three letters were not allowed.
The interval data from Syscom MR3000 measurement devices were offset by one interval in the diagrams, so that when the events were displayed, the deflections did not match.
In the measuring point properties, user-defined limit values could be selected for DIN 4150-3 independently of the vibration type. This is now only possible if continuous vibration is selected as the vibration type.
During BMR export, the peak of the third channel was not displayed in the evalution with view.

01.02.2017

The map view of a folder can be automatically adjusted so that all measuring points are visible on the map.
Beta support for Menhir accelerometer in the vibration measurement module.
Importing tachymeter data and displaying measurements/measuring points is now possible
Coordinate system can be set in the project properties
Expanded dashboard for tachymeter

Error when creating a user group, if only admin users existed within the project.
A folder with deleted measuring points could not be deleted. (Background: Deleted measuring points are still available for a certain time in the database and are only then permanently deleted.)
When changing the project of a Menhir device, it took a certain amount of time (ca. 1h) until remote access to the device worked again.
Umlauts in device measuring point names were not displayed correctly.
The zip files created during XMR/BMR exports could not be opened in Windows Explorer in certain circumstances.
Map view no longer functioned after version 2.4 in some circumstances.